Our piano hinges, also known as continuous hinges, are great for toolboxes, smokers, or any lid/door type application.

Our piano hinges, also known as continuous hinges, are great for toolboxes, smokers, or any lid/door type application.

Our piano hinges, also known as continuous hinges, are great for toolboxes, smokers, or any lid/door type application.

This 14 gauge, bare, tractor seat is great for painting, welding or decorating. They make great barstool seats!

This spring-loaded latch has a 3/4" pin with a 1" housing. It can welded to your existing metal get for a stong, easy-to-open latch assembly. The pin was designed for horse stalls to help prevent injuries. Includes two pins, one striker plate, a 3" pin for standard gate latch applications and a shorter 2" pin with rounded edges.

This simple latch has multiple uses and can be easily welded in the desired location. Constructed out of bare steel, making it perfect for painting.

This heavy duty hinge has a ball bearing and a 1/8" NPT grease zerk. It is perfect for any gate application.

All of our schedule 40 steel tees have beveled edges and are painted black.

Our flat hinges have no screw holes, but they are weldable and built to last. Use them for a variety of applications including doors, gates, BBQ pits and more!

All of our schedule 40 steel tees have beveled edges and are painted black.

This is a very heavy duty hinge that has a grease zerk and is constructed with 1/4" bare steel.

This pipe hinge sleeve is 3" tall, has an OD of 3-1/2", and is constructed of bare material. It comes with 2 collars and fits over 2.875"OD pipe.

All of our schedule 40 steel tees have beveled edges and are painted black.

This is a very heavy duty hinge that has a grease zerk and is constructed with 1/4" bare steel.

All of our schedule 40 steel elbows have beveled edges and are painted black

This lift-off style bullet hinge has a steel body and pin with a brass bushing. It can be welded on or has holes for mounting. Mounting hardware not included.

Our horseshoe tie-down can be welded to trailers, pickup beds, stalls, arenas and more! Use them anywhere you need to strap or tie down anything. Horseshoe design adds a touch of class to your typical d-ring.

All of our schedule 40 steel tees have beveled edges and are painted black.

This pipe hinge sleeve is 3" tall, has an OD of 2-7/8", and is constructed of bare material. It comes with 2 collars and fits over 2.375"OD pipe.

Lock boxes are commonly used with ornamental fencing. Backset is 2-3/8". Opening is 2-1/8"

Great for anchoring metal buildings

Our bullet hinges are very versatile. They are often used for gates, BBQ pits, and containers. They can be welded on as a lift-off hinge or permanently mounted.

Our flat hinges have no screw holes, but they are weldable and built to last. Use them for a variety of applications including doors, gates, BBQ pits and more!

Our winged hinges allow for a protected 90 degree surface.

This V-groove wheel box has a black powder coat finish. It will fit our 4" V-groove wheels #47061 and #49709. Dimensions: 5" x 2-1/4" x 3"

This lashing ring is made of forged steel, comes with mounting bracket, and is DOT compliant. WLL: 6,000 lbs.

This bolt-on strap hinge is constructed out of 9ga material and has a grease zerk. The hinge is zinc plated and the mounting hardware is not included.

Our bullet hinges are very versatile. They are often used for gates, BBQ pits, and containers. They can be welded on as a lift-off hinge or permanently mounted.

All of our schedule 40 steel elbows have beveled edges and are painted black

Our bullet hinges are very versatile. They are often used for gates, BBQ pits, and containers. They can be welded on as a lift-off hinge or permanently mounted.

This bolt-on strap hinge is constructed out of 9 gauage material and has a grease zerk. The hinge is zinc plated and the mounting hardware is not included.

Weld the striker plat to the face of a steel post. It makes a great receiver for a variety of latches with up to a 1" pin.

This latch is great for gates. It is a very diverse latch with multiple applications. Features a slot and pin which allows for an open locked position and a very stout spring for a full 1" of movement.

This lashing ring is made of forged steel, comes with mounting bracket, and is DOT compliant. WLL: 4,000 lbs.

Lock boxes are commonly used with ornamental fencing. Backset is 2-3/8". Opening is 2-1/8".

This lashing ring is made of forged steel, comes with mounting bracket, and is DOT compliant. WLL: 4,000 lbs.

Our bullet hinges are very versatile. They are often used for gates, BBQ pits, and containers. They can be welded on as a lift-off hinge or permanently mounted.

These triangle shaped plates are great for strengthening applications. Commonly used on fences, metal buildings, and more!

This zinc plated weld-on hinge is used for hanging gates to posts. It will swivel 180 degrees and is made up of a mounting plate, bolt, nut, and removable pin.

All of our schedule 40 steel elbows have beveled edges and are painted black.

Purlin clips are used to connect the purlin to the beam by means of welding the three together when constructing a metal structure.

This weld on 4" flag hinge has a 1/2" diameter pin. It is made for take-apart applications and easy removal of doors and panels.

Great for metal buildings! Weld-on application.

This weld-on flange is constructed out of 9 gauge material, has an inner square of 1-1/2", and 3/8" holes

All of our schedule 40 steel elbows have beveled edges and are painted black

This barrel hinge has many uses. It has a grease zerk and is zinc plated.

This small spring latch has a welded tab that makes for easy application. The key ring is designed as the "handle" to pull the latch open.

All of our schedule 40 steel elbows have beveled edges and are painted black

This bottle opener is great for mounting in your kitchen, on your patio, or even on a BBQ pit. Simply mount it anywhere you need to open bottles! Mounting hardware is included.